Bond It Contact Adhesive - Premium Grade 1Litre

SKU: HS4468
  • £16.99
Item in Stock | Usually dispatched within 24 hours
Loading...

A premium grade, solvent based, brown coloured, single component solvent-based contact adhesive. THIS PRODUCT IS TOLUENE-FREE.

Uses

CONTACT ADHESIVE can be used for bonding cork, leather, rubber, metals, wood, chipboard, hardboard, laminated plastics (e.g. Formica), dense textiles, plaster, stone, concrete, cementitious screeds and smoothing compounds. It will bond rigid PVC and uPVC sheets but the materials should be checked for suitability prior to application as solvent attack can occur in some instance.

Bond It CONTACT ADHESIVE may also be used to bond lightweight materials to vertical surfaces and ceilings. It is predominantly designed for interior use but can be used externally when the adhesive is protected from direct sunlight and water.

This product is not suitable for polystyrene, polythene, polypropylene, silicone rubbers, bitumen or PTFE. The solvent in the contact adhesive may attack certain painted or lacquered surfaces.

Preparation

Surfaces to be bonded must be clean, dry and free from dust, grease or contaminants that may hinder adhesion. Whenever possible, materials should be conditioned overnight in ambient conditions of 15- 20o C/ 60-65%RH. Very smooth surfaces should be abraded to provide an adequate key.

Application

Stir the glue thoroughly, prior to use, until a uniform consistency is obtained and the material has turned a creamy/brown. Apply the adhesive to both surfaces being bonded with a notched scraper, brush or trowel to produce a thin film. In cool, damp conditions take care that no condensation takes place on the glue lines as it will affect the adhesive bond. If condensation (evident by a grey "bloom" on the glue) does occur delay bonding until the glue is moisture-free. If the open time is exceeded, re-apply the adhesive to both surfaces. Leave the adhesive to become touch dry (approx 10-25 minutes depending on drying conditions). Maximum open time for this product is up to 25 minutes, however, it is advisable to make bonds within 20 minutes of adhesive application. Carefully align pieces to be bonded. For panel products, work from the centre outwards to minimise air entrapment. Press the two surfaces together and apply firm pressure with a hand rubber roller, block and mallet or mechanical press. Handling and trimming are possible immediately after bonding.

Be the first to review Bond It Contact Adhesive - Premium Grade 1Litre. Write a review

For support guides and advice relating to our products you can visit the Home Secure Blog

Alternatively you can Contact Us with any questions you may have

How much is delivery?

UK Delivery is FREE on all items no matter how many you order!

When will my order be dispatched?

Orders before 3pm (Monday to Friday) are usually dispatched same day but may take up to 24 hours

When will I receive my item?

We use Royal Mail for small parcels and next day delivery via courier for larger orders. 

Most of our orders arrive in 1-2 working days. 

Special order items such as keyed alike locks will take longer. Please refer to product description.

For further information - View our Delivery & Returns Page

Payments

To make a payment with Home Secure we accept the following methods:

  • Credit or Debit Cards (All major cards accepted)
  • Paypal (No account needed)
  • Amazon Payments (Amazon account needed)

How to place an online order with Home Secure:

Simply search our website for the products you require, add them to your basket and then proceed to checkout.

You will then need to provide us with your billing and shipping details.

Once we have your information you will be presented with the payment options outlined above.

On completion of payment you will then receive an email confirming your order with us. 

Security

Payment fraud is always a concern which is why we meet the highest possible level of Payment Card Industry Security Standards.

The standards, usually referred to as PCI DSS, are a series of strict technical and operational requirements.

Our system been independently audited and accredited with PCI DSS Tier 1 Certification compliance.

On top of this we also offer up to £1000 purchase protection under the Google Trusted Stores Programme. 

No matter what happens your details are safe with Home Secure. 

Top